hi, wanting to find out what tyre pressures everyone uses for innerleithen type dh in the dry and wet, also weight of rider and tyre choice,tubeless or not cheers. Rick

errmmmmmmm
dont use michelin mud 3s lmao not good well they are there just impossible to get on.

i got some super tacky high rollers while i was there last time and they seem quite good altho i was running a really high pressure cos i didnt want to risk another flat

Chewy

ok then? so what was the high pressure?

I dont no i jus pumped it up what i thought was right

it all depends on the conditions the tryes your using the trails ure riding how u ride what you ride etc etc

Chewy

i had 60psi in mine.... but that was mainly for riding to college so i dont think this would be wise for DH id put about 40psi in

and i have high rollers aswell are their good get the super tacky dual wall ones though

descent world forum... theres a guy sells them for 17quid each (cheapest ive seen!

I use Kenda Blue Groove and Nevegal. Not the strongest of side walls but they seem to offer really good grip. So far had no pinch flat on em either which i am pleased about cause i tend to run mine quiet soft compared to alot of people, not sure of the psi. Inners is very rooty so the softer the pressure the better the grip but don't get too hooked up on psi and stuff the best thing to do is ride and adjust accordingly to the conditions and terrain. I am 14 stone and have mine way softer than Matt who must weigh 12 stone!!!!

As for tubes i would also recomend the Gazzalodi DH Tubes don't use Maxxis tubes they are shit!!!

Little tech tip for you........ When you put your tubes on give them a good coating of baby talcum powder as it lets the tube slip over the rim rather than gripping the rim when hitting rocks etc, preventing pinch flats. Seems to work for me!!!

12 stone?!?! 11st 6lbs get it right lol

i jus have the pressure hard so i dont get pinch flats if i hit roots/rocks etc, but then i have my sus prettty soft so its a smoother ridee

with a higher pressure you get a better rolling speed etc (next john will say - thats why hes slow because his tyre pressure is lower...)

personal preference really just experiment

I think the maxxis tubes are fine once there in the bike the reason u had loads of pinches when we rode inners first john was cos of the tyres u were using imo.

i am gna stop using dh tubes with my tyres with decent sidewalls as there jus overkill imo and the lower weight at the edges the better the acceleration

Chewy

well i ran 1.95 enduro tyres wen we went to innerleithen on about 25-30 psi lol.

haha lol. Your tyres are just overkill for Inners

Chewy

cherrs eveyone!!!!!!!!!!!!!!!!!!!!!